DISC SPRINGS

Disc Springs

Introduction:

Disc Springs are conically formed angular Discs, which are loaded in the axial direction.  Disc Springs offer a well-developed solution to many engineering problems. Through a unique combination of high force in a small space, Disc Springs can be used as single disc or arranged in stacks.  A spring stack can consist of either single spring or parallel spring sets.  Disc Springs are available with or without contact flats.  Disc Springs and Belleville Washers are manufactured to DIN 2093 AND din 6796.   We have computerized design programmed to assist our customers for their specified applications.  Disc Springs are manufactured from imported 50CrV4 material. Our Disc Springs are AUSTEMPERED. This method of heat treatment is particularly effective for springs, as it gives the maximum toughness and therefore considerable durability.

Advantages of Disc Springs
1. No Deformation or Fatigue under normal loads.
2. High Energy Storage Capacity.
3. Long Service Life.
4. Stock keeping is minimized as the individual spring sizes can be combined universally.
5. Space Saving.
6. Largely Self-damping, giving good shock absorption and energy dissipation.
7. Efficient use of space and high spring force with small deflections.
8. Adaptable to stacking in numerous configurations.
9. Combination use as a modular spring element.
10. Low Maintenance cost

11

 Greater Security

Disc Spring

Disc Spring

Disc Spring

Disc Spring


Disc Spring Stack Compared to Helical Spring.
Note that the same load is achieved at substantial reduction in space. Disc stacks may be designed for extremely high loads where coil springs are not feasible at all.

Disc Spring

Disc Spring in Series & Parallel Combinations

 
Disc Spring

Disc Spring in Series & Parallel Combinations
Disc Spring

Disc Spring in Series & Parallel Combinations
  
Disc Spring

| Disc Springs [ Disc Spring Materials] [Disc Spring Application] [Disc Spring Installation] [Symbols & Units] 
[Disc Springs Std Din] [Disc Spring Tolerances] [Ball Bearing Disc Springs] [Disc Springs Washers] [Belleville Washer] | 
| Wave Spring Washers | | Serrated Safety Washers | | Flapper Reed Valves | | Stamping Sheet Metal | | Curved Washers | 
| Spiral Power Spring | | Spiral Torsion Spring | | Hot Coiled Springs | | Coil Springs | | Compression Springs | | Torsion Springs|
Address : Plot No. A-26, Road No. 10, Wagle Industrial Estate, Thane - 400604, Maharashtra, INDIA
* Tel. : 2582 1941 / 2508 / 2581 3416 * Fax : 91-22-2582 4478
* Email : sales@internationalsprings.com